— 69 —
ActionMeaning
Prompt message
E140 Wrong menu.
E141 Press <TRAY TTL>
twice before finalization.
E145 Arrangement syntax er-
ror.
E150 Incorrect value entry.
E151 Incorrect Key Pressed.
E152 PGM File or Memory
number does not Exist.
E164 Employee No. is not
Found in the Employee
File.
E165 Employee No. is not
Clocking-in.
E166 Employee No. is Occu-
pied.
E167 Incorrect Job code.
E168 Your Operation is out of
Schedule.
Please Call Manager.
E169 Work Hours Exceeded.
Please Call Manager.
E170 No Shift Remains in the
Schedule.
You cannot Clock-in.
E171 Please Break-out and
Retry.
E172 Break Hours Exceeded.
Please Call Manager.
E173 This employee is at work
now.
E174 This employee is taking
a break now.
E175 Please Clock-in/Break-
out before you sign on.
or Please Call Manager.
E176 You cannot Clock-in.
Please reset Employee
Report.
E177 Time&Attendance Data
Communication Error.
Please Call Manager.
E180 IDC FILE (1) memory
full.
Please clear IDC data.
E181 IDC FILE (2) memory
full.
Please clear IDC data.
E182 IDC FILE (3) memory
full.
Please clear IDC data.
This sheet holder is prohibited by pro-
gram.
<TRAY TOTAL> key is not pressed twice
before finalization.
Arrangement syntax error
Incorrect entry for PGM
Linking is incorrect.
No such file, no such record
Employee No. is not set in the Employee
File.
Employee has not done CLOCK-IN
operation yet.
Employee who has done CLOCK-IN
operation attempts to operate CLOCK-
IN again.
Employee attempts to operate CLOCK-
IN with incorrect JOB code.
Employees operate CLOCK-IN/OUT in
not allowance time.
Overtime work.
There is no available shift left.
Employee attempts to operate CLOCK-
OUT whilst he/she is in a break time.
Break hours are exceeded.
Employee is at work without break.
Employee who has not done BREAK-
OUT operation attempts to operate
BREAK-IN.
Sign on after you clock-in or break out.
Employee Report has not been reset.
Time & Attendance Data communication
error.
IDC FILE (1) memory is full of items.
IDC FILE (2) memory is full of items.
IDC FILE (3) memory is full of items.
Set correct sheet holder.
Follow the prompt message.
Program the arrangement again.
Enter proper value again.
Enter proper key again.
Enter file/record number again.
Enter employee number again.
Perform CLOCK-IN operation.
Enter the proper employee number again.
Enter proper job code.
Follow the prompt message.
Follow the prompt message.
Follow the prompt message.
Follow the prompt message.
Follow the prompt message.
Follow the prompt message.
Follow the prompt message.
Follow the prompt message.
Follow the prompt message.
Follow the prompt message.
To Next Page
Loading...
Need help?
General
