159
Read/reset report
TE-2200/2400 Dealer's Manual
Batch report
Report name
Report code
Daily Periodic 1 Periodic 2
PLU reset (no report) 50014 51114 51214
Scanning PLU reset (no report) 50026 ----- -----
Scanning PLU stock reset (no report) 50065 ----- -----
6: :a
Z1
X2/Z2
Mode switch
Report code
~
6 :::: 6a
::::
File reset
The value (record No. of the batch X/Z file - 1)
In X1 mode,
“Issue daily file report” = 00
“Issue consolidation file report” = 03
In Z1 mode,
“Issue daily file report” = 00
“Issue consolidation file report” = 03
In X2/Z2 mode,
“Issue periodic 1/2 read/reset file report” = 00
(Read/reset and periodic 1/2 are the dependent upon the control flag of the batch X/Z file.)
“Issue periodic 1 file read report” = 01
“Issue periodic 1 file reset report” = 11
“Issue periodic 2 file read report” = 02
“Issue periodic 2 file reset report” = 12
“Issue periodic 1 consolidation file read report” = 04
“Issue periodic 1 consolidation file reset report” = 14
“Issue periodic 2 consolidation file read report” = 05
“Issue periodic 2 consolidation file reset report” = 15
X1/Z1
X2/Z2
Mode switch
Report code
D
4
D
3
D
2
D
1
D
4
D
3
D
2
D
1
Note: If you skip to enter the report code, the 1st batch X/Z is executed.
To Next Page
Loading...
