Casio TE-2200 - Tax Table Programming

84
Key function/machine feature (P3)
Tax table programming
Programming procedure
8
3s
8
::::s
8
::^::::a
8
::::a
8
::::a
8
::::a
8
::::a
8
::::a
8
::::a
8
s
(for the U.S., Singapore)
Tax table 1 =
0125
Tax table 2 = 0225
Tax table 3 = 0325
(for Canada)
Tax table 1 =
0125
Tax table 2 = 0225
Tax table 3 = 0325
Tax table 4 = 0425
{
(for other area)
Tax table 1 =
0125
Tax table 2 = 0225
:= :
Tax table 10 = 1025
{
{
Tax rate (4-digit for integer + 4-digit for decimal)
Tax table maximum value (“0” means unlimited).
Rounding/tax table system code
*1
Sum of a cyclic pattern
Number of values in each cyclic pattern
Sum of values in each non-cyclic pattern
Actual value of difference of the non-cyclic and cyclic values
You must enter these values in 4-digit block. If the last block
comes out to be only two digits, add two zeros.
Loop to input the next block.
Canadian tax system
For both add-on and add-in tax systems.
To program Tax-on-tax system, you must use the tax address “0225”, “0325” or “0425.”
To program Donuts tax system, you must use the tax address “0125” or “0225.”
Tax system code specification
D
2
D
1
Rounding
4--Singapore rounding
-- 1 Tax table only
-- 2 U.S. tax table with tax rate or add-on tax only
-- 3 Add-in tax rate
-- 4 Tax-on-tax (Canada, Singapore)
-- 6 VAT-on-tax (Thailand)
-- 7 VAT & VAT_2
D
4
D
3
D
2
D
1
*1 Rounding/Tax system code
Rounding code specification
D
4
D
3
Rounding
50Rounding off two decimal places
90Rounding up to two decimal places
00Cut off two decimal places
PGM
Mode switch