94
DIRECTION INDICATION LIGHTER
FLASHER REMOVAL
Reversely perform the below
process to install.
1. Press the connector latch down
and pull the connector out form
the flasher.
2. Pull the rubber mount form the
cover.
3. Remove the flasher form the
rubber mount.
FUSE BOX REMOVAL Reversely perform the below
process to install.
The function and the Amp limit of each fuse are described as the lable
on the fuse box.
1. Press down the latches on the
both side of fuse box cover.
2. Lift the cover up.
To Next Page
Loading...
