Celcom E961 - Configuring Your Computer; Wireless Configuration

Conguring Your Computer
5
In this part, take the Window XP operating system (OS) as an example to describe how to
congure your computer. For other OSs, the conguration may be different; thus, you need
to congure it according to the actual situation.
Wireless Conguration
The wireless conguration enables your PC connect to the E961 through the wireless network.
If you need only the Ethernet to connect your PC, you do not need to congure this.
Conguration Requirements
• To set up wireless network connection, your PC must have been congured with the
WLAN adapter that supports the IEEE 802.11 b/g protocol.
• If the encryption function is enabled, you need to ensure that all PCs connecting to the
E961 use the same key with the E961.
• For the use of WLAN adapter, refer to the WLAN adapter user guide provided by the
manufacturer.
• See “Conguring the WLAN Encryption Mode” for the encryption conguration.
• See “Conguring the WLAN Setting” for SSID parameters conguration.
Conguring the Wireless Network Connection
1. Select Start > Control Panel > Network Connections > Wireless Network Connection.
2. Click Show Wireless Networks to display the wireless network connection list.
3. Select the network connection that the SSID is consistent with that in the E961 WEB
conguration, and then click .
13