CenterVue drs - 18. Maintenance

CenterVue
DRS Operating Manual
Pg. 48 of 57
18. MAINTENANCE
The only operation the operator can do on the device is the replacement of the fuses.
Following is the relevant procedure:
 Disconnect the power cord from the mains
 Remove the fuse holder with the help of a small screwdriver
 Remove and replace the fuses (see section ”Technical specifications”)
 Insert the fuse holder
 Connect the power cord to the mains.
All service interventions other than the above should be carried out by authorized
CenterVue personnel.
CenterVue recommends to require a service to the instrument in order to:
 check the electrical safety (IEC 60601-1) every year.
 check the general functionality every 5 years.
CenterVue and its authorized personnel can provide on demand specific maintenance contracts.