What to do if the USB key does not work with CenterVue drs?
If the CenterVue Medical Equipment's USB key isn't working, ensure a proper mechanical connection. Try using the USB extension cord included with the DRS, found in the accessories box, to connect the USB key.
What to do if CenterVue Medical Equipment fails auto-alignment?
If the CenterVue Medical Equipment fails auto-alignment during an exam, this could be due to damaged or unpowered pupil LEDs, and it is recommended to contact an Authorized Service Center.
General| Manufacturer | CenterVue |
|---|---|
| Model | drs |
| Field of View | 45° |
| Pupil Dilation Required | No |
| Function | Retinal Imaging |
| Focusing | Automatic |
| Connectivity | USB |
| Type | Non-Mydriatic Retinal Camera |
Informs the patient about the test and guides proper positioning for exams.
Covers safety warnings, legal restrictions, and operational guidelines for device use.
Outlines environmental conditions for operation and storage, and potential causes of image quality issues.
Registers a new patient in the system with their details.
Finds and selects a previously registered patient from the list.
Initiates the image capture sequence and selects acquisition parameters.
Describes the automated process of capturing retinal images, including eye search and auto-focus.
Guide for manually aligning the optical head when automatic alignment fails.
Describes screen layout and available functions for image management.
Interface for detailed image viewing and analysis, including export, print, and editing functions.
Configure and test network connections for the DRS.
Configure system-wide settings, including screensaver and third-party integration.
To Next Page
