CENTURION SYSTEMS VANTAGE - Page 55

page 55www.CentSys.com
CONTROLLER FEATURES SECTION 25
• Delete Remote by Button
Use this procedure to remove the remote control from the system.
All button functionality will be removed. The remote control is required for
this operation
• Delete All Remotes
Clears the entire memory. All remote controls will be erased
25.10.4. Edit Remote Button
Change the function on one remote button to perform another function.
For example, button one’s function is to open the gate completely. To change this
toPED,selecttheeditRemoteButtonmenu,useeditRemoteButton,selectPED,
button one of the same remote will now only open the gate to the pedestrian
setting. This function can also be used to change the button functionality from
‘pulse/momentary’ to ‘latched’.
25.10.5. Remote Control Menu locked
AllowstheRemoteControlsMenutobelocked,preventingtheunauthorised
additionofnewremotecontrolstothesystem.Onceenabled,theRemote
Controls Menu can only be accessed by pressing a valid remote control button.