CENTURION SYSTEMS VANTAGE - Page 54

page 54 www.CentSys.com
CONTROLLER FEATURESSECTION 25
25.10. Menu 11 - Remote Controls
The Controller is capable of learning up to 64 code-hopping remote control
buttons. Each remote control learned into the system is assigned a unique
remotecontrolID.Thesystemwillacceptone-,two-orfour-buttonremote
controls.
Benets of the Shift Button system:
• Itispossibletoarticiallyincreasethenumberofbuttonsofamulti-
buttonremotecontrolbyusingatwo-buttoncombination
• One of the buttons is used as a Shift Button to allow the other buttons
to be used again in combination with this button. In other words, the
user will press and hold the Shift Button, before pressing one of the
other buttons to create a new button
• The Shift Button cannot be used as a button on its own, it must always
be used in combination with the other buttons
25.10.1. Press Valid Button
If the Remote Controls Menu has been locked as discussed later, only by
pressingabuttonofaremotecontrollearnedintothesystem,cantheRemote
Controls Menu be accessed.
25.10.2. Add Remote
Any button can be set to control the Trigger, Pedestrian, Free-exit, Holiday
Lockout or Courtesy Light Control (LIT) actions. When adding remote controls,
it is recommended that a record be kept of the ID number allocated by the system
to each respective remote control and the person to whom the remote control is
given. This is necessary should selective deletion of the remote be required at a
later stage.
25.10.3. Delete Remote
Remotecontrolscanbedeletedatanystageaccordingtooneofthefollowing
methods:
• Delete Remote by ID
Each remote control can be deleted individually according to its unique ID.
To facilitate this, a record of the ID and the person to whom the ID has been
assigned must have been made at the time of learning the remote control into the
system. The remote control is not required for this operation
• Delete Remote Button
The operation of a button of a particular remote control can be deleted.
For example, it allows the Holiday Lockout function set on one remote button of a
remotecontroltobecleared,withoutaectingtheotheroperationsthatthesame
remote control performs. The remote control is required for this operation