FEATURES AND FUNCTIONS SECTION 4
4.1.13. External Gate Status Indication
FIGURE 28
A LED (Light Emitting Diode)
mounted on your intercom allows
you to view the position of your gate
and the condition of the battery and
power supply from the safety of your
home. The dierent signals of the
LED are described below:
LED Signal Diagnosis
O
Gate is closed
On
Gate is partially or fully open
Continuous slow ash
Gate is opening
Continuous fast ash
Gate is closing
One ash every two seconds
Courtesy (Pillar) lights on
Two ashes every two seconds
No mains present
Three ashes every two seconds
Battery voltage is low
Four ashes every two seconds
Multiple collisions have occurred
If you choose not to t a Gate Status Indicator, the Status LED on the Controller
can also be used for troubleshooting.
To Next Page
Loading...
