SECTION 7 CESSNA
AIRPLANE AND SYSTEM DESCRIPTION MODEL T182T NAV III
GFC 700 AFCS
U.S.
FLIGHT INSTRUMENTS
The G1000 Integrated Cockpit System primary flight instrument
indications are shown on the PFD. The primary flight instruments are
arranged on the PFD in the basic T configuration. The Attitude Indicator
(AI) and Horizontal Situation Indicator (HSI) are centered vertically on
the PFD and are conventional in appearance and operation. Vertical
tape-style (scrolling scale) indicators with fixed pointers and digital
displays, show airspeed, altitude, and vertical speed. The vertical
indicators take the place of analog indicators with a fixed circular scale
and rotating pointer.
Knobs, knob sets (two knobs on a common shaft) and membrane type
push button switches, found on the bezel surrounding each GDU
display, control COM, NAV, XPDR, AUTOPILOT, and GPS avionics, set
BARO (barometric pressure), CRS (course), and HDG (heading), and
work various flight management functions. Some push button switches
are dedicated to certain functions (keys) while other switches have
functions defined by software (softkeys). A softkey may perform various
operations or functions at various times based on software definition.
Softkeys are found along the lower bezel of the GDU displays.
(Continued Next Page)
T182TPHBUS-00
7-16
To Next Page
Loading...
Need help?
General
