CESSNA SECTION 6
MODEL T182T NAV III WEIGHT AND BALANCE/
GFC 700 AFCS EQUIPMENT LIST
U.S.
COMPREHENSIVE EQUIPMENT LIST
Figure 6-9 is a comprehensive list of all Cessna equipment which is available for
the Model T182T airplane equipped with Garmin G1000 Integrated Cockpit System
and GFC 700 Autopilot. This comprehensive equipment list provides the following
information in column form:
In the ITEM NO column, each item is assigned a coded number. The first two
digits of the code represent the identification of the item within Air Transport
Association Specification 100 (11 for Paint and Placards; 24 for Electrical
Power; 77 for Engine Indicating, etc.). These assignments also correspond to
the Maintenance Manual chapter for the airplane. After the first two digits, items
receive a unique sequence number (01, 02, 03, etc.). After the sequence
number, a suffix letter is assigned to identify equipment as a required item, a
standard item or an optional item.
Suffix letters are as follows:
In the EQUIPMENT LIST DESCRIPTION column, each item is assigned a
descriptive name to help identify its function.
In the REF DRAWING column, a Cessna drawing number is provided which
corresponds to the item.
If additional equipment is to be installed, it must be done in
accordance with the reference drawing, service bulletin or a separate
FAA approval.
In the WT LBS and ARM INS columns, information is provided on the weight (in
pounds) and arm (in inches) of the equipment item.
• Unless otherwise indicated, true values (not net change values)
for the weight and arm are shown. Positive arms are distances aft
of the airplane datum; negative arms are distances forward of the
datum.
• Asterisks (*) in the weight and arm column indicate complete
assembly installations. Some major components of the assembly
are listed on the lines immediately following. The sum of these
major components does not necessarily equal the complete
assembly installation.
R = Required items or equipment for FAA certification (14 CFR 23 or 14
CFR 91).
S = Standard equipment items.
O = Optional equipment items replacing required or standard items.
A = Optional equipment items which are in addition to required or
standard items.
T182TPHBUS-01
6-19
To Next Page
Loading...
Need help?
General
