SECTION 8 CESSNA
AIRPLANE HANDLING, SERVICE MODEL T182T NAV III
AND MAINTENANCE GFC 700 AFCS
U.S.
CLEANING AND CARE (Continued)
PROPELLER HEAT BOOT (Continued)
2. Allow the boots to dry, then apply a coating of Age Master No. 1
to the boots in accordance with application instruction on the
container.
Age Master No. 1 is beneficial for its ozone and weather
resistance features.
3. After the boots have been treated with Age Master No. 1, apply a
coating of ICEX to the boots in accordance with applicable
instructions on the ICEX container.
ICEX may be beneficial as an ice adhesion depressant.
Both Age Master No. 1 and ICEX are distributed by the B.F.
Goodrich Company.
ICEX CONTAINS SILICONE, WHICH LESSENS PAINT
ADHESION. USE CARE WHEN APPLYING ICEX, AND
PROTECT ADJACENT SURFACES FROM OVERSPRAY,
SINCE OVERSPRAY OF ICEX WILL MAKE TOUCH-UP
PAINTING ALMOST IMPOSSIBLE.
Age Master No. 1 and ICEX coatings last approximately 15 hours on
prop heat.
(Continued Next Page)
T182TPHBUS-00
8-26
To Next Page
Loading...
Need help?
General
