select the Intensity button.
The larger fader on the left controls all currently selected instruments. You can also modify
individual instruments by selecting them in this window.
Renaming your fixtures in patch makes selection easier.
Lamp On And Lamp Off
In addition at the top of this window there are buttons to “lamp on” or “strike selected
instruments or to “lamp off” the selection. If you have arc lamps then it may be necessary to
lamp on after applying power and to lamp off before powering down the fixture. Consult your
fixture manufactures documents for the correct operation.
Controlling Position
This window can be opened by selecting the [ Position ] button from the home window.
2021-03-12
QuickQ v6
23
To Next Page
Loading...
Need help?
General
