10Scene buttons can be used to toggle on and off either the first 10 execute buttons on the
execute page, the 10 playbacks or using Zones to activate execute buttons in Zones.
Settings
QuickQ offers four operation modes for 10Scene wall plates:
• 10Scene toggles playbacks 1-10 on and off, in this mode 10Scene wall plates will toggle on
and off playbacks recorded on right-hand side of the console, these can be either a cue or
a chase.
• 10Scene toggles executes 1-10 on and off, in this mode 10Scene wall plates will toggle on
and off the first 10 execute cues recorded in the Execute Window.
• 10Scene controls execute in zones set by groups
• 10Scene controls executes in rows
QuickQ supports up to 10 Zones.
Choose the option you want in the 10Scene Window Settings tab.
Panel
The 10Scene Panel window emulates a 10Scene wall plate in any of the 10 zones, or control all
of them.
The 10Scene Panel view can control any of the 10 Zones that QuickQ
supports, using the drop down at the top right of the panel
54
QuickQ v6
2021-03-12
To Next Page
Loading...
Need help?
General
