ChamSys QuickQ User Manual

Chapter 1. QuickQ Range
This manual covers QuickQ software version v6 and onwards.
The QuickQ range comprises:
• QuickQ Consoles: QuickQ 10, QuickQ 20 and QuickQ 30
• QuickQ Rack
• QuickQ Designer Application for macOS or Windows
• QuickQ Remote App for iOS, Android, Windows and macOS
• SnakeSys 10Scene Wall Plates
• SnakeSys 10Scene Gateway Box
The range allows simple, intuitive programming and control of stage shows and single or
multiroom venues. The consoles can also be integrated with 3rd party control systems.
QuickQ Consoles
The consoles all feature a large multitouch touchscreen. Consoles run the same software but
differ in the number of multifunction faders, playbacks, encoders and DMX universes.
Consoles have built in WiFi to allow connection to the free QuickQ Remote App. An external
monitor can be used (but is not required) to display a selection of other windows. The
consoles include a USB work lamp and an external power supply.
To the left of the display are multifunction faders. The faders can control individual fixtures,
groups of fixtures or cues. Below the display are the playback faders.
The grandmaster fader is to the right of the playback faders, allowing control of all intensities.
Make you sure you keep this at full!
4
QuickQ v6
2021-03-12

ChamSys QuickQ Specifications

General

Faders	10
Universes	1
DMX Outputs	1
USB Ports	1
Audio Input	No
DMX Channels	512
Internal Display	Yes
Physical DMX outputs	1
Type	Lighting Controller
Connectivity	USB
Protocols	DMX512