QuickQ Rack
The QuickQ Rack provides "always on" control for installation projects. The QuickQ Rack is
designed to act as a hub for the installation with physical control via the Rack’s 10 buttons,
SnakeSys 10Scene Wall Plates or other networked consoles. When other consoles are detected
on the network the QuickQ Rack can automatically hand off control to the lighting console
and resume control once the console is turned off.
10 buttons on the front of the unit allow for control of 10 individual scenes or 10 playbacks of
single scenes or automated chases. These 10 buttons can be extended to remote stations via
the SnakeSys 10Scene Wall Plates.
Ten SnakeSys 10Scene Wall Plates can be connected (daisy chained) to each of the 4 Phoenix
Connectors on the QuickQ Rack for a total of 40 wall stations. SnakeSys 10Scene Wall Plates
2021-03-12
QuickQ v6
5
To Next Page
Loading...
Need help?
General
