Cue Lists
To view the cues on a playback, either touch and hold or double tap the playback preview
window above the playback.
Recording a Chase
A chase will playback each cue, one after the other. To record a chase when the console is in
“live” mode settings, live mode):
• Record a second cue to a playback; the result will be a chase.
• Keep recording new cues to add more steps.
Playing Back a Chase
To play back the chase, raise the playback fader. When the last cue in the chase is reached the
chase will automatically loop back to the beginning and play the sequence again. Lowering
the fader will release the chase and stop it playing back. Raising the fader again will start the
chase from the first cue.
The fader position will control the intensity of the recorded fixtures.
Chase Direction
Chases direction can be modified from the cue list window using the buttons in the top right
of the window.
The options are:
• Play the chase backwards
• Play the chase forwards
• Play the chase forwards, then backwards
• Play random steps from the chase
2021-03-12
QuickQ v6
31
To Next Page
Loading...
