Examples:
To activate (turn on) Playback 1 at 100% send Midi Note 60 ON with velocity 127. To activate
(turn on) Playback 2 at 50% send Midi Note 61 ON with velocity 64. To release (turn off)
Playback 1 send Midi Note 60 OFF with any velocity. To release (turn off) Playback 2 send Midi
Note 61 OFF with any velocity.
From QuickQ version 6 onwards it is possible to also control the [ GO ] and [ Pause ] buttons
for each of the 10 playbacks. A note starting at note 72 to 81 will control the [ GO ] button,
moving up an octave starting at note 84 to 93 will control the [ Pause ] buttons for playbacks
1-10.
A note off command must be sent for the corresponding note, before the note on can be sent
again to activate the [ GO ] and [ Pause ]. For example: sending Midi Note 72 ON will press
[ GO ] on Playback 1, a Note 72 OFF must then be sent before sending another Note 72 ON to
[ GO ] on Playback 1 again.
2021-03-12
QuickQ v6
51
To Next Page
Loading...
