16
f) Screw the T bracket to the T mount kit tightly with M10 nuts (2 pcs);
g) Finally shake the steering wheel, check whether it’s tight, and check again whether
the steering clearance is too large.
3.2.5 Receiver installation
a) The receiver needs to be installed on the central axis of the vehicle roof as possible,
and the installation direction should be parallel to the vehicle as possible;
b) After confirm the installation position, wipe the roof clean and make sure the
bracket installation is spotless;
c) Adjust the receiver bracket to make sure the receiver is placed horizontally, also
the receiver arrow must face forward.
To Next Page
Loading...
