79
4.2.11.2 Alarm Settings
It is available to set the alarm modes and thresholds here based on practical
operational scenarios.
End of Row Distance: It will sound the alarm when close to boundary/AB line within
the threshold. If there is only an AB line, the system will recognize the distance from
the A/B point; if there is only a boundary, the system will recognize the distance from
the boundary; if there is both an AB line and a boundary, the system will only
recognize the distance from the boundary.
Automatic Alarm: It will have sound and message alarm when exceeds the thresholds
during auto steering mode.
Manual Alarm: It will have sound and message alarm when exceeds the thresholds
during manual mode.
4.2.11.3 Port Settings
Here is the port settings to output NMEA information, set 5V pulse signal output and
set Speed converter.
To Next Page
Loading...
