Edge/Edge Blanket Operating Principles
5-5
MAIN ELECTRICAL PANEL COMPONENTS
Schematic Description
CON1 Contactor - Inlet and Exit Conveyors (INV1/INV2)
CON2 Contactor - Upper and Lower Spreaders (INV3/INV4)
CR1 Control Relay - Start Circuit
CR2 Control Relay - Inverter Fault Contacts
CR3 Control Relay - Interlocks
CR4 Control Relay - Conveyor Run
CR5 Control Relay - Inlet Touch Sensor
CR6 Control Relay - Inlet Touch Sensor
CR7 Control Relay - Crossbeam Sensor
CRO Control Relay - Interconnect Stop Circuit Output Signal (option)
CRI Control Relay - Interconnect Stop Circuit Input Signal (option)
INV1 Inverter - Inlet Conveyor Motor
INV2 Inverter - Exit Conveyor Motor
INV3 Inverter - Upper Spreader Motor
INV4 Inverter - Left/Right Lower Spreader Motors
MP4 Motor Protector - Left Lower Spreader Motor
MP5 Motor Protector - Right Lower Spreader Motor
To Next Page
Loading...
