Chino DB600 Series - 5-9-3 Output 2 control system

INST.No.INE-868G [DB600] General Instruction Manual
- 103 -
5-9-3 Output 2 control system
The output 2 control system of this instrument is intended for the heating/cooling control, and two types of
control calculation: PID and split are available. Understand each of the control calculation method and
select the appropriate one. See the section 6-8 for details.
The required items for PID control calculation setting are "Output 2 PID", "Output 2 PID deadband",
"Output 2 gap", "Output 2 control action" and "Output 2 output preset".
The required items for split control calculation setting are "split Direct" and "split Reverse".