Chino DB600 Series - 1-1-3 Symbol mark; 1-1-4 Request for opening and handling

INST.No.INE-868G [DB600] General Instruction Manual
- 5 -
1-1-3 Symbol mark
The following symbol marks are used in this product itself and in this instruction manual hence
understand the meaning of these symbol marks properly.
Label Name Meaning
Alert symbol mark
Place to refer to the instruction manual to avoid
“electric shock” and “injuries”, etc.
Pay extra attention during wiring, inspection and
maintenance.
AC Indicate an alternating current.
DC/AC Indicate both of direct and alternating current.
Outline protection
Indicate the device which entire outline is protected by
double insulation or reinforced insulation.
Symbol marks on this instruction manual
W
arning
Warnings are explained to avoid causes for death or serious
injuries of users.
Caution
Cautions are explained to avoid causes for slight injuries of users
or damages of the unit or peripheral devices.
1-1-4 Request for opening and handling
Request
1. Do not drop the product while taking it out of the box
2. When transporting the product, pack in the dedicated package box, and put the box in an outer
case with a bed of cushion. With the consideration to the case above, it is recommended that the
dedicated package box for the product stored.
3. When the product is removed from the panel and not used for a long time, put it in the dedicated
package box, and store it in a place with normal ambient temperature and dust free atmosphere
according to the storing condition.