Chino DB600 Series - 2-3-2 Insulation block; 2-3-3 Terminal number and functionality

INST.No.INE-868G [DB600] General Instruction Manual
- 20 -
2-3-2 Insulation block
In the chart below, circuit divided by the lines are insulated from other circuits.
 DB630  DB650／DB670
Power
terminals
Measuring input terminals
Remote input terminals R/L (analog) DI terminals
Control output 1 terminals
(current output type/SSR drive pulse output type/
voltage output type)
Control output 1 terminals (ON-OFF pulse output
type)
Event output 1/2 (mechanical relay output)
terminals
Communications terminals R/L (digital) DI
terminal
External signal input (DI1 to 5) terminals
*For "24V AC/DC", power terminals are at secondary side.
*Between control output 1 (ON-OFF pulse output type) and event
output 1/2 (mechanical relay output) is isolated.
Power
terminals
Measuring input terminals CT input terminals
Remote input terminals R/L (analog) DI terminals
External signal input (DI6/7) terminals
Control output 1/2 terminals
(current output type/SSR drive pulse output type/
voltage output type)
ON-OFF servo (feedback input) terminals
Transmission output (4 to 20mA DC/0 to 10V DC)
Control output 1/2 terminals (ON-OFF pulse
output type)
Event output 1 to 4 (mechanical relay output)
terminals
ON-OFF servo (relay output) terminal
Communications terminals R/L (digital) DI terminal
External signal input (DI1 to 5) terminals
Event output 5 to 9 (open collector output )
*For "24V AC/DC", power terminals are at secondary side.
*Between control output 1/2 (ON-OFF pulse output type) and event
output 1 to4 (mechanical relay output) is isolated.
2-3-3 Terminal number and functionality
Depending on the instrument model, there are places where terminal screw is not provided.
 DB630
Terminal layout
(1) Control output 1 + (7) Communication
SA
DI1 (13) EV1
(2) Control output 1 - (8) Communication
SB
DI2 (14) EV1 COM
(3) Measuring input + (9) Communication
SG
DI3 (15) EV2
(4) Measuring input + A (10) R/L (digital) DI4 (16) EV2 COM
(5) Measuring input - B (11) DI1 DI5 (17) Power L/+
(6) Measuring input b (12) R / L & DI COM DI COM (18) Power N/-