INST.No.INE-868G [DB600] General Instruction Manual
- 6 -
1-1-5
Important
arning
To avoid major accidents, make sure to read and understand the
followings and use the product.
Check the power supply voltage and wiring
Before supplying the power to the product, check that the wiring is correct and power supply voltage
matches with the rated voltage etc.
Install circuit breaker
This product does not have a power supply switch. Install a circuit breaker that matches the rating
specifications in the power supply of the product.
Protection of terminal
To prevent electric shock, provide the terminal of the product with safety measures such that the user will
not be able to touch the final product directly.
Install safety device
Regarding the use of a device that anticipates a big loss due to failure of this product and the peripheral
devices, always install a safety device for preventing these losses and implement fail safe design in the
final product.
Do not put your hands inside the product
Do not put your hand and tool inside the product. You may get an injury or an electric shock.
Power cut off in case of suspicion
If there is offensive smell, strange noise or smoke or if the temperature increases abnormally, it is very
risky hence cut off the power supply immediately and contact the dealer or nearest CHINO's office.
Prohibit repairing and remodeling
If repairing or remodeling is necessary, contact the dealer or nearest CHINO's office. Only the service
engineers appointed by our company will change the parts, do the repairing and remodeling.
Strictly follow the instruction manual
In order to use the product correctly and safely, follow this instruction manual. Please understand
beforehand that our company will not at all be responsible for any claims for injury, damage, and passive
damage due to wrong use of the product.
To Next Page
Loading...
