Need help?Do you have a question about the Chino KP3000 and is the answer not in the manual?
General| Input Type | Thermocouple, RTD, DC Voltage, DC Current |
|---|---|
| Communication | RS-485 (Modbus) |
| Operating Temperature | 0 to 50°C |
| Storage Temperature | -20 to 60°C |
| Control Output | Relay, Voltage pulse, Current |
| Alarm Output | Relay contact output |
| Power Supply | 100-240V AC, 50/60Hz |
| Output Current | DC 4 to 20 mA |
| Power | 10VA max |
| Dimensions | 96 x 96 x 100mm |
Guidelines for safe installation and operation, emphasizing professional knowledge.
Describes MODBUS protocol, its modes (RTU/ASCII), and functionalities.
Lists communication parameters for MODBUS protocol (speed, data length, parity, etc.).
Lists communication parameters for PRIVATE protocol (speed, data length, parity, etc.).
Sets the communication speed (baud rate) for PC communication.
Assigns a unique number to the device for communication.
Selects the communication function, e.g., COM or TRANS.
Selects the communication protocol, such as MODBUS or PRIVATE.
Configures communication character settings like bit length, parity, and stop bits.
Explains the RTU and ASCII modes for message transmission in MODBUS.
Explains the different function codes used in MODBUS communication and their responses.
To Next Page
