-1 -
1. Introduction
Thank you for purchasing Digital Program Setter 'KP3000 series'.
KP 3000 series is Digital Program Setter with output accuracy of ±0.1%, output update cycle of
approximately 0.1 seconds and front size of 96X96mm.
Up to 30 types of program patterns etc. are various functionalities that are provided as standard
provisions. Besides a digital indicator with large easy to view LED display, various settings have an
interactive system with high resolution dot matrix LCD display and handling is also easy with precise
control.
Understand the setter properly and read this instruction manual beforehand in order to avoid any
trouble.
This is a 'Communication' instruction manual. For general specifications, read 'General' instruction
manual along with this manual.
1. You should not copy or forward fully or partially this document without prior notice.
2. The contents of this document may be changed without notice.
3. We have taken enough care regarding the contents of this document however if at all you
notice a mistake or an omission contact our nearest office.
4. Please understand that regarding the result of the operation, whatever is the result the
company will not be responsible.
Notice
- For the persons doing instrumentation, installation and sales -
Be sure to handover this instruction manual to the persons using the controller.
- For the users of the controller -
Preserve this instruction manual until you scrap the controller.
Request
To Next Page
Loading...
Need help?
General
