Chino KP3000 - 9-3-5. Individual parameter setting (PC → KP)

- 69 -
9-3-5. Individual parameter setting (PC → KP)
Parameter type No. Format
Time signal
(1 to 8)
[Mode 6 lock]
19
STX 19, □, □□□.□□, □□□.□□, ETX BCC CR LF
ON Time OFF Time
Do not change the setting in case of 6 digits space.
1 to 8=Parameter No.
0=Copy to No. 1 to 8
(Note) Delimiter for time hours/minutes, minutes/seconds is a period.
SV decimal point
[Mode 5 lock]
32
STX 32, □, ETX BCC CR LF
(Note)Differs from display SV decimal point.
SV during Reset
[Mode 2 lock]
49
STX 49, □□□□□□, ETX BCC CR LF
Reserve
[Mode 5 lock]
51
STX 51, □□, □, ETX BCC CR LF
Initial value:0
Initial value:5
(Note) Only when read respond by initial value. Do not change the settings
in case of write.
SV scale
[Mode 5 lock]
52
STX 52, □□□□□□, □□□□□□, ETX BCC CR LF
MIN MAX
Do not change the settings when all the digits are spaces.