Chroma 61503 - Page 99

Remote Operation
8-17
8.6.2.7 LIST Sub-system
[SOURce :]
LIST
: POINts?
: COUNt
: DWELl
: SHAPe
: BASE
: VOLTage
: AC
: STARt
: END
: DC
: STARt
: END
: FREQuency
: STARt
: END
: DEGRee
OUTPut
: MODE
TRIG
TRIG : STATE?
[SOURce:] LIST : POINts?
Description : This command returns the number of sequences of the list
mode.
Query Syntax : [SOURce:] LIST : POINts?
Parameters : None
Return Parameters : <NR1>, valid range: 0 ~ 100
[SOURce :] LIST : COUNt
Description : This command sets the number of times that the list is
executed before it is completed.
Query Syntax : [SOURce :] LIST : COUNt?
Parameters : <NR1>, valid range: 0 ~ 65535
Return Parameters : <NR1>
[SOURce :] LIST : DWELl
Description : This command sets the sequence of dwell time list points.
Query Syntax : [SOURce:] LIST : DWELl?
Parameters : <NR2>, …, <NR2> valid range: 0 ~ 99999999.9 (unit: ms)
Return Parameters : <NR2>, …, <NR2>
[SOURce :] LIST : SHAPe
Description : This command sets the sequence of waveform buffer list
points .
Query Syntax : [SOURce:] LIST : SHAPe?
Parameters : A|B, …, A|B
Return Parameters : A|B, …, A|B