3-12 Turning Up the System
5160 Service Aggregation Switch Hardware Installation and Start-up Manual
009-3207-001 Standard Revision A
Copyright
©
2013 Ciena
®
Corporation September 2013
Procedure 3-6
Accessing the CLI using Telnet
Step Action
1 Use a Telnet client to connect to the
5160.
Telnet <IpAddress>
2 At the login prompt enter a valid user name and password.
Example:
3916 00:02:A1:07:B0:80
SAOS is True Carrier Ethernet TM software.
3916 login: su
Password:
SAOS is True Carrier Ethernet TM software.
Welcome to the shell.
You have logged in to the CLI using Telnet.
To Next Page
Loading...
