Installation 2-3
5160 Service Aggregation Switch Hardware Installation and Start-up Manual
009-3207-001 Standard Revision A
Copyright
©
2013 Ciena
®
Corporation September 2013
Important Safety Information
WARNING: Read all installation instructions before connecting a 5160 device to a
power source.
WARNING: The chassis of the 5160 should never be opened under any
circumstances. Opening the chassis will void the warranty.
The system chassis must be returned to Ciena for service or replacement.
Power supply modules and transceivers are field-replaceable, however, the modules
or transceivers must be returned to Ciena for service or replacement.
WARNING: Before working on equipment that is connected to power lines, remove
jewelry (including rings, necklaces, and watches). Metal objects will heat up when
connected to power and ground and can cause serious burns or weld the metal
object to the terminals.
WARNING: Do not work on the system or connect or disconnect cables during
periods of lightning activity.
WARNING: To prevent ESD damage to electronic components, always use an ESD
wrist strap when handling modules.
WARNING: Do not stack anything on top of this unit. The mounting brackets
provided with this unit are designed to support only the weight of this unit, if they fail
due to excess weight, it can cause bodily injury and damage the equipment.
WARNING: When installing the unit, ensure that the wiring meets the local and
national electrical codes.
To Next Page
Loading...
