3-1
5160 Service Aggregation Switch Hardware Installation and Start-up Manual
009-3207-001 Standard Revision A
Copyright
©
2013 Ciena
®
Corporation September 2013
Turning Up the System 3-
This chapter contains procedures to assist with the initial configuration of the
5160, including the following:
• “Logging in through the Serial Console Port”
• “Creating a New User Account”
• “Deleting a User Account”
• “Managing Licenses”
• “Configuring the Remote Management Interface”
• “Accessing the CLI Using Telnet”
• “Configuring the Local Management Interface”
• “Configuring an Interface using DHCP”
• “Setting the System Host Name”
• “Logging Out of the System”
For information on managing system software, including performing software
upgrades, see 39XX/51XX Configuration.
Note: The system turn-up process is similar across all systems using the
SAOS software. As a result, this chapter may make reference to other
products within the product family.
To Next Page
Loading...
