Ciena 5160 - Page 47

Turning Up the System 3-3
5160 Service Aggregation Switch Hardware Installation and Start-up Manual
009-3207-001 Standard Revision A
Copyright
©
2013 Ciena
®
Corporation September 2013
A user at the super access level can create user accounts with the following
access levels:
• limited (read-only)
• admin (read/write)
• super (read/write)
• diag (read/write)
See the related procedures:
• “Creating a new user account” on page 3-8
• “Deleting a user account” on page 3-9
Deleting a User Account
After you have created new user accounts for all access levels described in
Table 3-1, it is recommended that you delete the default user accounts. At
least one user with super user privileges must be configured on the device.
See the related procedures:
• “Creating a new user account” on page 3-8
• “Deleting a user account” on page 3-9
Managing Licenses
A license is a permit to use a feature or set of features. The physical license
consists of a cover sheet and a copy of the license terms. The cover sheet has
a label affixed to it identifying the license model number and license key. The
licenses are shipped with the hardware.
Note: It is strongly recommended that you keep a copy of your license
keys in a safe place.
You need to install the license key on the 5160 in order to activate the features
associated with the license.
You can install multiple licenses on a device. The names of the licenses and
the devices on which they are supported are summarized in Table 3-2 on page
3-4.