Cimarron ARCONTROL BMS - Page 34

32
The following are seng descripons, sengs opons and default values for each PROCESS seng (Table 3.4.2).
Table3.1.1 · SETTINGS MENU system sengs
Table 3.4.2 · PROCESS seng descripons, opons and default values
SETTING DESCRIPTION
OPTIONS
DEFAULT
SOURCE
Selects which inputs is used as the process
current value or process variable
Mode Process Default
Ø (NONE) 1 XDCR
TC1 2 Ø (NONE)
TC2 3 Ø (NONE)
TC BMS IND Ø (NONE)
XDCR
LOGIC
Selects the logic applied to the high and
low levels and the output of the process
Mode Process Default
↑ OFF ↓ ON 1 ↑ ON ↓ OFF
↑ ON ↓ OFF 2 ↑ ON ↓ OFF
WINDOW 3 ↑ ON ↓ OFF
INV WINDOW IND ↑ ON ↓ OFF
HIGH LEVEL Selects the process upper threshold value
Range Value Process Default
Min -32768 1 50
Max 32767 2 150
3 150
IND 150
LOW LEVEL Selects the process lower threshold value
Range Value Process Default
Min -32768 1 20
Max 32767 2 120
3 120
IND 120
CEILING
Sets the limit of how high the process
HIGH LEVEL can be set from the process
quick set menu
Range Value Process Default
Min -32768 1 55
Max 32767 2 32767
3 32767
IND 32767
FLOOR
Sets the limit of how low the process LOW
LEVEL can be set from the process quick
set menu
Range Value Process Default
Min -32768 1 15
Max 32767 2 -32768
3 -32768
IND -32768