Cimarron ARCONTROL BMS - MANUAL Mode

79
Informaon about the current state and prompts for aconable menu items is presented in the system menu state
addional informaon entry (STATE ADDTL INFO) (Table 4.1.2).
4.2 MANUAL Mode
In MANUAL mode the duraon of ignion is manually controlled by the user (Image 4.2.1). Once the pilot is lit, the
user must iniate the process control. The system will not aempt to automacally relight if ame is lost. ON DEMAND
mode is not available in MANUAL mode operaon.
Table 4.1.2 · AUTOMATIC state addional informaon
→
S T A T E = T S O P P E D
H L O D O K → + 2 I G N I T E
P₂ =
P₁ =
Ø
0 . 0
o
z
in
2
≡
≡
Image 4.2.1 · System Menu - MANUAL start-up
AUTOMATIC MODE
OPERATION STATE SYSTEM MENU DISPLAY DESCRIPTION
STOPPED START (HOLD OK) Aconable menu item: START (HOLD OK)
START-UP CHECKING SYSTEM... Indicates system is checking the input PS3 (Proof of Closure)
PRE-PURGE mm:ss
Displays pre-purge me before transioning to the IGNITE state
(minutes : seconds)
IGNITE mm:ss Displays the remaining ignion me (minutes : seconds)
PURGE IGN RETRY=XX mm:ss
Displays the remaining purge me and number of ignion retries
remaining (minutes : seconds )
WAIT WAIT RETRY=XX mm:ss
Displays the wait me if there are WAIT retry(s) remaining (minutes
: seconds )
EST PILOT mm:ss
Displays the remaining me that the system will check for the
connuous presence of ame (minutes : seconds)
PILOT ON DDDDDDDDDD:hh:mm:ss Displays elapsed me the Pilot is on (days: hour: minutes : seconds)
IDLE DDDDDDDDDD:hh:mm:ss
Displays elapsed me the system is idle (days: hour: minutes :
seconds)
ACTIVE PRCS 1 DDDDDDDDDD:hh:mm:ss Displays elapsed me for Process 1 (days: hour: minutes : seconds)
ACTIVE PRCS 2 DDDDDDDDDD:hh:mm:ss Displays elapsed me for Process 2 (days: hour: minutes : seconds)
ACTIVE PRCS 3 DDDDDDDDDD:hh:mm:ss Displays elapsed me for Process 3 (days: hour: minutes : seconds)
ACTIVE PRCS 1,2 DDDDDDDDDD:hh:mm:ss
Displays elapsed me for Process 1 & 2 (days: hour: minutes :
seconds)
ACTIVE PRCS 1,3 DDDDDDDDDD:hh:mm:ss
Displays elapsed me for Process 1 & 3 (days: hour: minutes :
seconds)
ACTIVE PRCS 2,3 DDDDDDDDDD:hh:mm:ss
Displays elapsed me for Process 2 & 3 (days: hour: minutes :
seconds)
ACTIVE PRCS ALL DDDDDDDDDD:hh:mm:ss
Displays elapsed me for Process 1 & 2 & 3 (days: hour: minutes :
seconds)