Cimarron ARCONTROL BMS - Alarm & Shutdown States

A L A R M ! A L A R M ! A L A R M
A L A R M :
D I N : [ S T A T E B V
B
= 1 1 . 4 ]
P R E S S O K T O C L E A R
!
V
L O W T T E R Y
A
82
Informaon about the current state and prompts for aconable menu items is presented in the system menu state
addional informaon entry (STATE ADDTL INFO) (Table 4.2.2).
4.3 Alarm & Shutdown States
4.3.1 Alarm States
Both alarms and shutdowns will stop the system processes if certain condions are met. The system monitors various
parameters for undesirable condions, some of which are congurable, and will enter an alarm state (Image 4.3.1) if
those condions are met. This is to ensure proper operaon of the system and control of the processes.
Table 4.1.2 · MANUAL state addional informaon
Image 4.3.1 · Example of alarm state
MANUAL MODE
OPERATION STATE SYSTEM MENU DISPLAY DESCRIPTION
STOPPED HOLD OK+ 2 STRT
Aconable menu item: Hold the OK key for at least a second to
start ignion
START-UP CHECKING SYSTEM... Indicates system is checking the input PS3 (Proof of Closure)
PRE-PURGE mm:ss
Displays pre-purge me before transioning to the IGNITE state
(minutes : seconds)
IGNITE mm:ss Displays the remaining ignion me (minutes : seconds)
PILOT ON DDDDDDDDDD:hh:mm:ss Displays elapsed me the Pilot is on (days: hour: minutes : seconds)
IDLE DDDDDDDDDD:hh:mm:ss
Displays elapsed me the system is idle (days: hour: minutes :
seconds)
ACTIVE PRCS 1 DDDDDDDDDD:hh:mm:ss Displays elapsed me for Process 1 (days: hour: minutes : seconds)
ACTIVE PRCS 2 DDDDDDDDDD:hh:mm:ss Displays elapsed me for Process 2 (days: hour: minutes : seconds)
ACTIVE PRCS 3 DDDDDDDDDD:hh:mm:ss Displays elapsed me for Process 3 (days: hour: minutes : seconds)
ACTIVE PRCS 1,2 DDDDDDDDDD:hh:mm:ss
Displays elapsed me for Process 1 & 2 (days: hour: minutes :
seconds)
ACTIVE PRCS 1,3 DDDDDDDDDD:hh:mm:ss
Displays elapsed me for Process 1 & 3 (days: hour: minutes :
seconds)
ACTIVE PRCS 2,3 DDDDDDDDDD:hh:mm:ss
Displays elapsed me for Process 2 & 3 (days: hour: minutes :
seconds)
ACTIVE PRCS ALL DDDDDDDDDD:hh:mm:ss
Displays elapsed me for Process 1 & 2 & 3 (days: hour: minutes :
seconds)