Cimarron ARCONTROL BMS User Manual

WARNING!
1
1 Introducon
Thank you for purchasing the ARControl BMS Module, our most popular process control and ignion package.
This manual will provide you with important informaon that will help you understand the system, setup the system
and how the system operates. Please keep the manual in an accessible locaon for future reference. At Cimmaron
Energy Inc. we are always here to assist you with any service or spare part needs. Contact us at:
Phone: 1-844-746-1676
Website: hps://www.arcontrolbms.com
1.1 Hardware Installaon
The ARControl BMS should be installed according to the direcons provided in this manual and always be in compliance
with local electrical codes and the specicaons of the operang company. This secon will cover general instrucons
regarding safety as well as specic wiring and materials required for the safe and successful operaon of the ARControl
BMS.
1.1.1 Proper Use of the BMS Module 1870-511
The valve output on the BMS Module is the system’s ESD valve and is intended to be installed upstream of all other
valves in the ARControl BMS installaon. The dual-probe thermocouple input on the BMS Module is intended to be
used as the source for the high-temperature cuto. If the BMS Module 1870-511 is used in a manner not specied by
Cimarron Energy, Inc., the protecon provided by the equipment may be impaired.
Failure to comply with the following safety warning(s) may result in serious personal injury or death.
• Ensure the power is not connected unl the nal step of installaon.
• Failure of the grounding system integrity can result in personal injury, damage, or failure of operaon.
The equipment must be grounded in accordance with instrucons and devices and wiring connected to the
controller must be according to the appropriate electrical code
• Ensure that no personnel nor any objects come into contact with the ignion module, terminals, or damaged
coil wiring. The ignion coil can generate 38kV and is considered a hazard.
• If using an external power supply, do not power the ARControl with a supply rated for more than 24VDC.
Failure to comply with the following safety warning(s) may result in damage to the product.
• When installaon is complete, ensure that the enclosure is properly sealed and the fasteners are ght. The
enclosure will ensure that the internal components are not aected by moisture, ice, or debris.
• Disconnect and remove the baery during transportaon or when the ARControl will not be operated for
a period of me.
1.1.2 ARControl Installaon Guidelines
• A switch or circuit breaker must be included in the installaon; it must be suitably located and easily reached. It
must be marked as the disconnecng device for the equipment.
• Proper earth grounding per local electrical codes must be ulized in the installaon.
• If the ARControl is used in a manner not specied by Cimarron Energy, Inc., the protecon provided by the
equipment may be impaired.
• If the BMS Module (1870-511) is used in conjuncon with the ARControl it must be mounted externally of the
ARControl in order for the ARControl to remain regulatory compliant.
• Use the hardware supplied with the ARControl. The hardware kit supplied with the ARControl contains an
aluminum pre-drilled mounng bracket, and (4) 3/4-inch bolts and nuts.
NOTICE

Cimarron ARCONTROL BMS Specifications

General

Brand	Cimarron
Model	ARCONTROL BMS
Category	Control Unit
Language	English