4
18. If using the High-temperature shutdown feature, navigate to SETTING MENU > BMS MODULE >
TEMP LIMIT to set the high-temperature shutdown temperature.
19. If using Temperature Control (old Torch funconality) (Image 1.2.2), navigate to SETTING MENU > PROCESS 1
and set:
• SOURCE to TC BMS
• LOGIC to ↑ OFF ↓ ON
• HIGH LEVEL to high process temperature
• LOW LEVEL to low process temperature
20. Navigate to the START (HOLD OK) menu entry on the home screen and hold the OK key for at least a
second. This will start the ignion sequence and process control.
To Next Page
Loading...
