187
Update
Chapter 6
Applying Formats for Data Editin
Field 4 Setting
1. Read the barcode below to divide field 4 by a specified terminating string.
elect
Field
eparator
to Divide Field 4…
2. Read the “Hexadecimal Value” barcode on page 218 for the desired character string.
3. Read the “Validate” barcode to complete this setting.
4. Read the “Discard Separator” barcode if the field separator is not desired in the field.
*Include Separator
Discard Separator
If not dividing the field by a specific separator, you may divide it by a specified length.
1. Read the barcode below to divide field 4 by length.
Divide Field 4
by Length
2. Read the “Decimal Value” barcode on page 217 for the desired field length.
3. Read the “Validate” barcode on the same page to complete this setting.
To Next Page
Loading...
