27
Update
Chapter 1
Understanding the Barcode Scanner
1.2.2 MEMORY MODE
When the scanner is in memory mode, it means any real-time connection established
with host is disabled.
The 1660 scanner keeps 256 KB flash memory for memory mode operation.
The 1661 scanner keeps 512 KB flash memory for memory mode operation.
Enable
*Disable
Warning: No real-time connection is allowed unless the memory mode is disabled.
Memory Data Delay
You may set a delay between each data record while transmitting data back to the host.
*None
250 ms
500 ms
1 sec
2 sec
3 sec
To Next Page
Loading...
Need help?
General
