100
Android Deployment Configurator User Guide
“Criteria” is to set the limits and requirements to filter the decoded data.
When the barcode is read and the input data fulfils the “
criteria”, it will be dealt with by the
associated “
actions” which defines the output data format.
The available criteria to be set are:
Barcode Input
To designate the barcode symbology.
By selecting “All”, all the barcode symbologies will be reformatted by
“actions”.
To set the barcode length to limit the decoded data to be reformatted.
String Position
This function works with “Specific String” to designate the particular position
this specific string should be in. By selecting “0”, the specific string can be in any
position.
Specific String To designate the string that the decoded data must include.
The decoded data should meet all the criteria you set and then the data will be reformatted
by “
actions” before outputting.
After completeing editing “
criteria”, please click on “Apply” to save your criteria settings, or
expand the “
actions” part to edit the actions.
To Next Page
Loading...
Need help?
General
