Name: CipherLab RS35
Brand: CipherLab
Rating: 4 (1 reviews)

To Next Page

To Previous Page

161

Customize Project Configuration

BEEPER

Setting

Description

Low Battery LED

Check to enable the LED indicator of RK25 UHF RFID Reader which

will flash in red 5 times every 2 minutes or when it wakes up from

suspend mode if the battery power level is 0%

Beep when good read

Select to mute the beeper for good read, or set the sound for good

read.

Low Battery Beep

To enable the low battery notification sound which occurs when the

RK25 UHF RFID Reader’s battery power level is 0%.

Temperature Warning

Check to enable the notification to prompt you if the RK25 UHF RFID

Reader is over 65

℃

. The high temperature warning will not go off

until the temperature drops down to 62

℃

3.13.2.

SCAN SETTINGS

Setting

Description

Power Level

To drag the slider to adjust the power level for reading distance.

Trigger Key

Set the reading mode when pressing the trigger once:

 Once

To read the tag(s) once.

 Continuous

To keep reading the tag(s) till the trigger is released.

 Alternate

To perform “Once” and “Continues” one after the other

repeatedly.

Other manuals for CipherLab RS35

Questions and Answers:

Need help?

Do you have a question about the CipherLab RS35 and is the answer not in the manual?

General