- 4 -
Android Deployment Configurator User Guide
1.11 May 28, 2021 Revise based on version 1.09.
RS35 mobile computer & RK95 mobile computer Cold Chain model
are supported.
Update all figures.
Rearrange all chapters and contents.
Remove the description about WMDS.
Add the description about “Keypad Layout” & “Cold Chain” to
Section 1.3.1 “New Project”
Add new sections “Compressed project files” & “Customize Android
Setup Wizard”to Chapter 2 “Project Management & Main Screen”.
Add the description about the toolbar button “Description” to
Section 2.1.2 “ADC System Setting buttons”
Add new section “Overview” & “Customize” to Chapter 3 “Customize
Project Configuration”.
Add new sections “Auto Permission” & “Other Configuration
Section 3.3 “Apps”.
Add the description about “Delete WLAN connected list” to
Section 3.7 “Wi-Fi Settings”.
Update Section 3.14 “Enterprise Settings”.
Add the description about “ZIP File from FTP” to Section 3.17
“Advanced System Settings”.
Add new chapter: Apply Configuration to Device.
1.10 Sep. 02, 2020 Modified: Getting Started – sections and contents rearranged
Modified: 1.4.2 Advanced System Settings – ADC files backup
onto hidden partition added
Modified: 2.6.5 Barcode Reader – description revised
Modified: 2.6.9 Wi-Fi Settings – Wi-Fi Connection Timeout added
Modified: 2.6.11 Terminal Emulation –
description for all functions
added
Modified: 2.6.13 System Settings – Notifications & Sound added
Modified: 2.6.15 EZConfig (for RK25 UHF RFID Reader) –
power mode & descriptions for all tabs appended
New: 2.6.16 Enterprise Settings
New: 2.6.17 SIP Controller
Modified: Chapter 3 Barcode To Setting – only the Barcode
Reader tab reserved for example demonstration
To Next Page
Loading...
Need help?
General
