CipherLab RS35 User Manual

43
Project Management & Main Screen
SECURITY
User can enable the password protection for certain features in ADC program through
“
Security ” if necessary.
To change your security settings, enter and confirm your password if you want to enable
password protection, and then click “
Save ” to save the setting. This setting will be
immediately applied.
 Save – Save the settings and close the pop-up window at the same time.
 Cancel – Directly close the pop-up window without changing any settings.
 Clear Password – Clear the field “Enter password (maximun 32 characters)” and
“Confirm passoord”.
Save
Cancel
Clear Password

CipherLab RS35 Specifications

General

Battery Capacity	4000 mAh
NFC	Yes
RAM	3 GB
Storage	32 GB
Camera	13 MP rear, 5 MP front
Connectivity	USB
Ruggedness	IP67
Touch Panel	Multi-touch capacitive
Scanning	2D Imager
Wireless LAN	802.11 a/b/g/n/ac/d/h/i/r/k/v
GPS	GPS, GLONASS, BeiDou
Operating Temperature	-10°C to 50°C
Display Size	5.5 inches
Operating System	Android 10