Contents
4
Cisco Aironet 1552 Series for Hazardous Locations Installation Guide
Wireless Backhaul 1-22
Point-to-Point Bridging 1-23
Point-to-Multipoint Bridging 1-23
Point-to-Multipoint Mesh Network 1-24
WirelessHART Gateway Configuration 1-26
Layer 3 Network Operation 1-28
CHAPTER
2 Before You Begin 2-29
Unpacking the Access Point 2-30
Package Contents 2-30
Tools and Hardware 2-30
Optional Tools and Hardware 2-30
Optional Tools and Hardware That You Supply 2-31
Pole Installation Hardware and Tools 2-31
Warnings 2-32
Safety Information 2-32
FCC Safety Compliance Statement 2-33
Safety Precautions 2-33
Avoiding Damage to Radios in a Testing Environment 2-35
Additional Considerations for Hazardous Locations 2-35
Warnings 2-36
Compliance 2-38
KOSHA Certificate Information (for Korean hazardous locations) 2-39
Installation Guidelines 2-39
Site Surveys 2-40
Before Beginning the Installation 2-40
Becoming Familiar with Access Point Installation Components 2-41
Antenna N-Type Connector Locations 2-43
Adding the Access Point MAC Addresses to the Controller Filter List 2-43
Configuring a RAP 2-44
CHAPTER
3 Installing the 1552 Series Access Points in Hazardous Locations 3-45
Mounting on a Wall or a Pole 3-45
Installation Option 3-45
Access Point Mounting Orientation 3-46
Mounting the Access Point on a Wall 3-46
Mounting the Access Point on a Pole 3-51
Assembling the Pole Clamp Bracket and the Mounting Bracket 3-51
Pole Mounting 3-53
To Next Page
Loading...
