Contents
5
Cisco Aironet 1552 Series for Hazardous Locations Installation Guide
Working with the Access Point Hinged Cover 3-58
Opening the Access Point Hinged Cover 3-58
Closing the Access Point Hinged Cover 3-59
Grounding the Access Point (all models) 3-60
Installation Details for the 1552H Access Point 3-61
Connecting a Fiber-Optic Cable to the 1552H Access Point 3-61
Installation Details for the 1552SA and 1552SD Access Point 3-63
Connecting a Fiber-Optic Cable to the 1552SA or 1552SD Access Point 3-65
Installation Details for the 1552WU Access Point 3-69
Using the Reset Button 3-69
Rebooting the Access Point 3-70
Powering the Access Point 3-71
Connecting a 1552H Series Power Injector 3-71
Connecting an Ethernet Cable to the Access Point (all models) 3-73
Connecting a 24 VDC Power Cable to the Access Point 3-75
Connecting Ground and AC Power 3-77
Performing Maintenance 3-79
Removing the Access Point from Service 3-80
Conducting Periodic Inspections 3-80
Conducting Periodic Cleaning 3-80
What to Do Next 3-80
CHAPTER
4 Troubleshooting 4-81
Guidelines for Using the Access Points 4-82
Important Notes 4-82
Convergence Delays 4-82
Bridge Loop 4-83
Controller DHCP Server 4-83
MAP Data Traffic 4-83
Controller MAC Filter List 4-83
Using DHCP Option 43 4-84
Monitoring the Access Point LEDs 4-84
Verifying Controller Association 4-85
Changing the Bridge Group Name 4-86
Connecting to the Access Point Locally 4-86
Access Point Power Injector 4-87
Monitoring the Power Injector LEDs 4-89
To Next Page
Loading...
