3-11
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Chapter 3 Interface Configuration
Protocol Configuration Options for RADIUS
The selections made in this procedure determine what TACACS+ options
Cisco Secure ACS displays in other sections of the HTML interface.
Protocol Configuration Options for RADIUS
It is unlikely that you would want to install every attribute available for every
protocol. Displaying each would make setting up a user or group cumbersome. To
simplify setup, this section allows you to customize the attributes that are
displayed. For a list of supported RADIUS AV pairs and accounting AV pairs, see
Appendix C, “RADIUS Attributes”.
Depending on which AAA client or clients you have configured, the Interface
Configuration page displays different types of RADIUS protocol configuration
settings choices. The Interface Configuration page displays RADIUS IETF
settings whenever any RADIUS AAA client is configured. The Interface
Configuration page also displays additional settings for each vendor-specific
RADIUS type. The settings that appear for various types of AAA client depend
on what settings that type of device can employ. These combinations are detailed
in Table 3-1 on page 3-12.
To Next Page
Loading...
Need help?
General