Cisco 3.3 User Manual

Chapter 7 User Management
Basic User Setup Options
7-4
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
This section contains the following topics:
• Adding a Basic User Account, page 7-4
• Setting Supplementary User Information, page 7-6
• Setting a Separate CHAP/MS-CHAP/ARAP Password, page 7-7
• Assigning a User to a Group, page 7-8
• Setting User Callback Option, page 7-9
• Assigning a User to a Client IP Address, page 7-10
• Setting Network Access Restrictions for a User, page 7-11
• Setting Max Sessions Options for a User, page 7-16
• Setting User Usage Quotas Options, page 7-18
• Setting Options for User Account Disablement, page 7-20
• Assigning a Downloadable IP ACL to a User, page 7-21
Adding a Basic User Account
This procedure details the minimum steps necessary to add a new user account to
the CiscoSecure user database.
To add a user account, follow these steps:
Step 1 In the navigation bar, click User Setup.
The User Setup Select page opens.
Step 2 Type a name in the User box.
Note The username can contain up to 64 characters. Names cannot contain the
following special characters:
# ? " * > <
Leading and trailing spaces are not allowed.
Step 3 Click Add/Edit.
The User Setup Edit page opens. The username being added is at the top of the
page.

Cisco 3.3 Specifications

General

Brand	Cisco
Model	3.3
Category	Software
Language	English