7-23
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Chapter 7 User Management
Advanced User Authentication Settings
• RADIUS Attributes, page 7-37
–
Setting IETF RADIUS Parameters for a User, page 7-38
–
Setting Cisco IOS/PIX RADIUS Parameters for a User, page 7-39
–
Setting Cisco Aironet RADIUS Parameters for a User, page 7-41
–
Setting Ascend RADIUS Parameters for a User, page 7-43
–
Setting Cisco VPN 3000 Concentrator RADIUS Parameters for a User,
page 7-44
–
Setting Cisco VPN 5000 Concentrator RADIUS Parameters for a User,
page 7-46
–
Setting Microsoft RADIUS Parameters for a User, page 7-47
–
Setting Nortel RADIUS Parameters for a User, page 7-49
–
Setting Juniper RADIUS Parameters for a User, page 7-51
–
Setting BBSM RADIUS Parameters for a User, page 7-52
–
Setting Custom RADIUS Attributes for a User, page 7-53
TACACS+ Settings (User)
The TACACS+ Settings section permits you to enable and configure the
service/protocol parameters to be applied for the authorization of a user.
This section contains the following topics:
• Configuring TACACS+ Settings for a User, page 7-24
• Configuring a Shell Command Authorization Set for a User, page 7-26
• Configuring a PIX Command Authorization Set for a User, page 7-29
• Configuring Device-Management Command Authorization for a User,
page 7-30
• Configuring the Unknown Service Setting for a User, page 7-32
To Next Page
Loading...
